course | Corrosion Inspection, Diagnosis, Failure Analysis & Condition Assessment
We turn your development needs and aspirations into powerful digital solutions that drive growth
OGC-1568 | Corrosion Inspection, Diagnosis, Failure Analysis & Condition Assessment
Course Sector : Oil, Gas and Chemical
| Duration | Date from | Date to | Course Venue | Course fees | Book a course |
|---|---|---|---|---|---|
| 5 Days | 2025-05-26 | 2025-05-30 | Dubai | $4,250 | Book now |
| 5 Days | 2025-09-22 | 2025-09-26 | Los Angeles | $5,950 | Book now |
| 5 Days | 2025-12-29 | 2026-01-02 | Dubai | $4,250 | Book now |
| 5 Days | 2025-02-03 | 2025-02-07 | Abu Dhabi | $4,250 | Book now |
| 5 Days | 2024-09-30 | 2024-10-04 | Abu Dhabi | $4,250 | Book now |
Course Introduction
Corrosion Problems have always presented a Severe Challenge to all Industrial Field Operations. Operators plan for long periods of continuous production with maintenance schedules for the prescribed shutdown periods. Unfortunately, corrosion does not always respect these schedules, resulting in severe economic penalties due to loss of production. In addition, the risk of pollution and hazards to safety are other important reasons for adequate Corrosion Engineering.
Fracture mechanics.
All industrial problems which confronts the engineers, few can be economically more important than the prevention of metallic corrosion and mechanical failure. The corrosion failure of metallic materials causes billions of dollars globally every year. This seminar combines two major aspects of industrial and governmental problems. These are corrosion and fracture mechanics. The lack of understanding will not only cost a lot of money it will also cost human life.
Preventing or reducing the corrosion mechanism will increase the productivity and efficiency of any plant.The course considers external protection using corrosion resistant materials, coatings, and cathodic protection. The importance of internal corrosion and its prevention will be examined with emphasis on material selection, coatings and use of corrosion inhibitors. Also it is structured in order to train people in the fundamental understanding of corrosion and fracture mechanics. The course also highlights protection methods and fracture prevention methods. Alloy selection and material design is also considered from a practical angle.
Course objective
- To understand the Principles of Oxidation, Corrosion Mechanism and Fracture Mechanics.
- Learn how to apply Non-Destructive Test (NDT) Methods of Inspection and metallurgy of corrosion and fracture of metallic alloys.
- Understanding Mechanism of Failure Mode of Industrial Components and Corrosion Protection Methods.
- Learn how to apply Modern Technology Development of Corrosion Protection Alloys.
- Apply Quality Control Methods in Corrosion Protection and Also High Temperature Corrosion and Oxidation Principles for demanding Industrial Applications.
- Understand the Fracture Mechanism and Failure Modes of Engineering Components from a Practical Angle.
- Understanding of Corrosion Engineering in Industrials involving the Various Methods available for Corrosion Control, regulatory and safety matters, and the contribution of an integrated monitoring and inspection program.
Course Outline | 01 Day One
Module (01) Introduction to Corrosion
- 1.1 Corrosion Theory
- 1.2 Corrosion Identification
- 1.3 Types of Corrosion
- 1.4 Causes of Corrosion
- 1.5 Losses due to Corrosion
- 1.6 Electrochemical Aspects of Corrosion
- 1.7 Thermodynamics of Corrosion
- 1.8 Kinetics of Corrosion Processes
Course Outline | 02 Day Two
Module (02) Forms of Corrosion
- 2.1 Uniform Attack
- 2.2 Galvanic Corrosion
- 2.3 Crevice Corrosion
- 2.4 Pitting Corrosion
- 2.5 Selective Leaching
- 2.6 Erosion Corrosion
- 2.7 Corrosion Cracking
- 2.8 Inter-granular Corrosion
Course Outline | 03 Day Three
Module (03) Economic Factors Affect in Design
- 3.1 The Approach to Design
- 3.2 Choice of Materials
- 3.3 Environmental Factor
- 3.4 Geometric Factor
Module (04) High Temperature Corrosion
- 5.1 Oxidation and Corrosion of Stainless Steels
- 5.2 Metallurgical Evaluation Ni base Metal Corrosion
- 5.3 Metallurgical Nature of Co base Alloy Corrosion
- 5.4 Hot Gas Atmosphere for Hot Corrosion
- 5.5 Industrial Examples of High Temperature Corrosions
- 5.6 Failure Initiation from Hot Corrosion (Creep/Fatigue)
Course Outline | 04 Day Four
Module (05) Corrosion Monitoring Techniques
- 5.1 Corrosion Monitoring
- 5.2 Corrosion Rate Measurements
- 5.3 Materials Choice
- 5.4 Corrosion Control Methods
- 5.5 Management of Corrosion Control
Module (06) Corrosion Prevention & Control
- 6.1 Types of Corrosion Inhibitors
- 6.2 Dose Optimization
- 6.3 Effectiveness Monitoring
- 6.4 Control of Process Parameters
- 6.5 Materials Selection and Design
- 6.6 Coatings (Selection, Monitoring)
Course Outline | 05 Day Five
Module (07) Laboratory Demonstration
- 7.1 Corrosion Rate Measurements
- 7.2 Linear Polarization & Tafel Plots
- 7.3 Potentio-Dynamic Scanning
- 7.4 Electrochemical Impedance Spectroscopy
Module (08) Failure Investigation
- 8.1 Failure Mechanism and Metallography
- 8.2 Cost of Failure and Industrial Examples
- 8.3 Structural Design against Fracture and Failure
- 8.4 Wear (Adhesive/Abrasive/Fettering)
- 8.5 Surface Structure of Materials
- 8.6 Surface Hardening by Carburizing
- 8.7 Hard Facing Technology
- 8.8 Alloy Selection for the Right Applications
- 8.9 Correct Welding and Joining Practices
BOOST’s Professional Attendance Certificate “BPAC”
BPAC is always given to the delegates after completing the training course,and depends on their attendance of the program at a rate of no less than 80%,besides their active participation and engagement during the program sessions.
Upcoming Courses In This Sector
Since 2001, we have been pioneering the training field in the Middle East, helping individuals, teams, and organizations reach their full potential with integrated solutions.
🔗 Quick Links
Sister Companies to Boost Consulting and Training
most trending
And Recommended Training Courses
We believe in progress for everyone.
We helped more than 10,000 clients over 20 countries on 4 continents in boosting their knowledge, skills, and careers.
Boost Training And Consulting All Copyrights Reserved 2025