course | Shaft Alignment, Dynamic Balancing Techniques & Measuring Tools
We turn your development needs and aspirations into powerful digital solutions that drive growth
MEC-1170 | Shaft Alignment, Dynamic Balancing Techniques & Measuring Tools
Course Sector : Mechanical Engineering
| Duration | Date from | Date to | Course Venue | Course fees | Book a course |
|---|---|---|---|---|---|
| 5 Days | 2025-05-11 | 2025-05-15 | Manama | $4,250 | Book now |
| 5 Days | 2025-07-27 | 2025-07-31 | Riyadh | $4,250 | Book now |
| 5 Days | 2025-10-13 | 2025-10-17 | Vienna | $4,950 | Book now |
Course Introduction
Machines that have been precision aligned run longer, and cost less to run. Alignment greatly affects the life of bearings, seals, shafts and couplings. Also, unbalance causes fatigue and reduces the life of bearings and can make looseness and resonance condi-tions far worse. This course will bring you knowledge and skills in using a vibration analyzer/balancer, or a simple sheet of graph paper and protractor, and balance a machine - without even having to remove it from the plant. You will learn how to recognize unbalance and set up the balance job for a successful balance.
Reverse-dial method
This course will equip you with the knowledge and skills so that you can use a dial indicator tool or laser alignment system to pre-cisely align two components together. You will learn how to recognize misalignment and successfully set up the alignment job. After reviewing the important reasons for performing shaft alignment, there will be a discussion about the pre-alignment checks and corrections, including how to identify and correct soft foot. The operation of dial indicators, and cover the rim-face method and reverse-dial method will also be discussed. The process will be demonstrated and discussed as well as how calculations are per-formed.
Laser alignment systems will be discussed; the benefits, basic theory of operation, and tips and techniques for successful use. And finally there will be discussion on how to move the machine and deal with all the problems that you are bound to encounter at some stage. We will also review how to deal with thermal growth, and how to approach a larger machine train.
Course objective
- Have Good Information on how Shaft Misalignment causes Failures in Equipment.
- Explain how they work and understand how to measure runout on mechanical couplings and machinery shafts.
- Have understanding about how to construction and improve their capabilities and skills required to identify and measure misalignments in different machines and their causes and how to correct or monitor them.
- Have a detailed understanding of Advanced Time and Frequency Analysis Techniques and have acquired knowledge of Accurate Diagnosis of Antifriction Bearings.
- Gain Knowledge on measurement & correction Vertical and Horizontal Plan misalignment aligning Vertical mounted Equipment.
- Understand the practices in measuring and correcting “SoftFoot” problems and measuring run-out on Alignment de-monstrators.
Course Outline | 01 DAY ONE
Module (01) Soft Foot Checks and Corrections
- 1.1 Different types of Soft Foot
- 1.2 Rocking Soft Foot
- 1.3 Short Foot - Parallel Air Gap
- 1.4 Even Foot
- 1.5 High Foot
- 1.6 Bent Foot
- 1.7 Squishy Foot
- 1.8 Induced Soft Foot
Module (02) Importance Soft Foot
- 2.1 Why is Soft Foot Important?
- 2.2 Shaft Fatigue
- 2.3 Bearing Distortion
- 2.4 Impact on the Alignment Task
Course Outline | 02 DAY TWO
Module (03) Testing for Soft Foot
- 3.1 Testing for Soft Foot
- 3.2 Taking Soft Foot Measurements
- 3.3 Recording Results
- 3.4 Using Dial Indicators to measure Soft Foot
- Module (04) Correcting Soft Foot
- 4.1 Correcting Rocking Soft Foot
- 4.2 Short cut number One: The Casanova
Method 4.3 Short cut number Two: The 80% Rule
- 4.4 Using Feeler Gauges
- 4.5 Using a "Stair" of Shims
- 4.6 More Complex Shim Patterns
- 4.7 Detecting and Correcting induced Soft Foot
- 4.8 Mysterious Soft Foot
Course Outline | 03 DAY THREE
Module (05) The Rim-Face Dial Indicator Method
- 5.1 Accuracy Issues 5.2 Setup Problems
- 5.3 Axial End-Float 5.4 Rim-Face Measurement Procedure
- 5.5 Compensate for Bar Sag
- 5.6 Alternative Method
- 5.7 Determine the Alignment Corrections
- 5.8 Performing the Calculations
- 5.9 Computing the Offset
- 5.10 Computing the Angularity
- 5.11 Computing feet movements
- 5.12 Shim calculations
- 5.13 Move calculations
- 5.14 Example calculations
- 5.15 The graphical method
Course Outline | 04 DAY FOUR
Module (06) The Reverse Dial Method
- 6.1 Reverse Dial Procedure
- 6.2 Compensate for Bar Sag
- 6.3 Performing the Calculations
- 6.4 Computing the Offset
- 6.5 Computing the Angularity
- 6.6 Computing feet Movements
- 6.7 Shim and move Calculations
Module (07) Laser Alignment Systems
- 7.1 The basic components in a laser alignment system
- 7.2 Benefits of laser alignment systems over dial indicators
- 7.3 How do laser alignment systems work?
- 7.4 Using a Prism - Return Beam Method
- 7.5 Beam Splitter - Single Beam Method
- 7.6 Twin Emitter/Detector Pairs - Dual Beam Method
- 7.7 Using a horizontal beam and a vertical detector
Course Outline | 05 DAY FIVE
Module (08) Performing Laser Alignment Measurements
- 8.1 Performing the measurements
- 8.2 The 3:00-12:00-9:00 method
- 8.3 Swept measurements
- 8.4 Getting the results
- 8.5 Aligning spacer shafts or jackshafts
- 8.6 What if you can't rotate one shaft?
- 8.7 What if the shaft can't be rotated easily?
- 8.8 What if you can't rotate either shaft?
- 8.9 Limitations of laser systems
- 8.10 Backlash
- 8.11 Heat, steam, sunlight, water vapor
BOOST’s Professional Attendance Certificate “BPAC”
BPAC is always given to the delegates after completing the training course,and depends on their attendance of the program at a rate of no less than 80%,besides their active participation and engagement during the program sessions.
Upcoming Courses In This Sector
Since 2001, we have been pioneering the training field in the Middle East, helping individuals, teams, and organizations reach their full potential with integrated solutions.
🔗 Quick Links
Sister Companies to Boost Consulting and Training
most trending
And Recommended Training Courses
We believe in progress for everyone.
We helped more than 10,000 clients over 20 countries on 4 continents in boosting their knowledge, skills, and careers.
Boost Training And Consulting All Copyrights Reserved 2025