MODULE (01) INTRODUCTION

• 1.1 Basic Concepts
• 1.2 Water Distribution System Layout
• 1.3 Population Estimation

MODULE (02) REVISION, OF HYDRAULICS ENGINEERING (PART I)

• 2.1 Pressure
• 2.2 Hydrostatic Pressure
• 2.3 Pressure Head
• 2.4 Measurement of Pressure
• 2.5 Flow Rate
• 2.6 Continuity of Flow
• 2.7 Conservation of Energy
• 2.8 Flow in Pipes under Pressure
• 2.9 Hazen-Williams Equation
• 2.10 Hazen-Williams Nomo Graph 

MODULE (02) REVISION, OF HYDRAULICS ENGINEERING (PART II)

• 2.11 Flow Measurement
• 2.12 Gravity Flow in Pipes
• 2.13 Manning’s Formula
• 2.14 Partial Flow in Pipes
• 2.15 Open Channel Flow Measurement
• 2.16 Non-uniform Open Channel Flow
• 2.17 Specific Energy
• 2.18 Critical Flow Gradually
• 2.19 Gradually varied Flow
• 2.20 Rapidly varied Flow 

MODULE (03) WATER DISTRIBUTION SYSTEMS

• 3.1 Design Factors
• 3.2 Required Flows and Pressures
• 3.3 Per Capita Demand
• 3.4 Variations in Water Demand
• 3.5 Fire Flows
• 3.6 Pressures
• 3.7 Pipeline Layout
• 3.8 Water Mains
• 3.9 Materials
• 3.10 Installation
• 3.11 Pump Design
• 3.12 Centrifugal Pumps
• 3.13 Pump Characteristics
• 3.14 Pump Head Curve
• 3.15 System Characteristics
• 3.16 System Head Curve
• 3.17 Pump Operating Point
• 3.18 Parallel Operation 

MODULE (04) DISTRIBUTION SYSTEM

• 4.1 Types of Distribution Reservoirs
• 4.2 Flow in Pipe Networks
• 4.3 Pipes in Series
• 4.4 Pipes in Parallel
• 4.5 Pipe Network Analysis
• 4.6 Hydraulics of Water Wells

MODULE (05) PRESSURE PIPING SYSTEMS AND WATER QUALITY ANALYSIS

• 5.1 WATER use and availability
• 5.2 Pressure Systems
• 5.3 Energy Loss
• 5.4 Energy Gains- Pumps
• 5.5 Control Valves
• 5.6 Pipe Network
• 5.7 Network Analysis
• 5.8 Water Quality Analysis 

MODULE (06) MAINTENANCE OF DISTRIBUTION NETWORK SYSTEM

• 6.1 Construction site inspections on work by other utilities
• 6.2 Pipeline facility repair
• 6.3 Line patrols
• 6.4 Sluice valve operation
• 6.5 Pipeline appurtenance inspection
• 6.6 Public notification
• 6.7 Pipe flushing