Module (01) Introduction to RBI

• 1.1 Meaning of RBI
• 1.2 Methodology within each Step of An RBI
• 1.3 Contribution with RBIs most Effectively
• 1.4 The Information and Commitment Required
• 1.5 The benefits of RBI
• 1.6 Guidelines of RBI
• 1.7 Guidelines on Periodicity of Examinations
• 1.8 Guidelines on Risk Assessments
• 1.9 Guidelines on Risk Based Inspection
• 1.10 Selection Process for RBI Approach

Module (02) Application of Risk Based Inspection

• 2.1 System Definition
• 2.2 Criteria for Application
• 2.3 Summary of Main Points
• 2.4 References for Industrials
• 2.5 Probability Analysis

Module (03) The RBI Team

• 3.1 Composition and Competencies
• 3.2 Role of the Competent Person
• 3.3 Role of Team Leader
• 3.4 Conduction of Approach to RBI Assessment
• 3.5 Summary of main Points

Module (04) Plant Data Requirements

• 4.1 Essential Data
• 4.2 Failure Consequence Assessment
• 4.3 Published Data, Experience and technical Guidance
• 4.4 Case Studies for Practical Industrials

Module (05) Risk Analysis Procedures

• 5.1 Elements of the Process
• 5.2 Identification of Accident Scenarios
• 5.3 Identification of Deterioration and Mode of Failure
• 5.4 Probability of Failure Assessment
• 5.5 Determination of the Risks from Equipment’s Failure
• 5.6 Risk Ranking and Categorization

Module (06) Assessing Degradation/ Deterioration Risk

• 6.1 Developing De-gradation Risk Scenarios
• 6.2 Generic Fixed Equipment Degradation
• 6.3 Typical Risk Scenarios to be consider RBI
• 6.4 Assessing Failure Consequence
• 6.5 Assessing Damage Mechanisms, Probability Failure
• 6.6 Inspection Planning using API RBI Technology
• 6.7 Risk Matrix (Area and Financial)

Module (07) Identification and Managing Risk

• 7.1 Define Credible Risk Scenarios
• 7.2 Assess Unmitigated Risks for each Scenario
• 7.3 Define Potential Mitigation Strategies
• 7.4 Assess Mitigated Risks and Estimate Costs & Benefits for the Business

Module (08) Risk and Cost Benefits Analysis

• 8.1 Risk-based Benefits/Cost Analysis
• 8.2 Evaluating the Need for Equipment Monitoring
• 8.3 Inspection, Preventive Maintenance, or Repair
• 8.4 Modification and Re-design
• 8.5 Life Cycle Cost Analysis

Module (09) RBI Integrated with O & M Planning

• 9.1 Review Risk Assessment to assure Highest Risks have been mitigated
• 9.2 Determine Optimum Mitigation Strategy involving Inspection, Operation, Maintenance for each Risk And among related Risks
• 9.3 Prioritize Recommendations by comparing relative Value among Strategies.
• 9.4 Compile Risk-based, Prioritized, Cost Effective Portfolio of Improvement Opportunities.
• 9.5 RBI Assessment may identify Risks that may be Managed by Actions other than Inspection
• 9.6 Upgrading Safety and Detection System
• 9.7 Remove of unnecessary insulation to reduce Probability of Corrosion under Insulation