course | Instrumentation & Control Systems for Industrial Machinery
Advance your career with Instrumentation & Control Systems for Industrial Machinery. Hands‑on learning in Dubai covering instrumentation control systems
ICC-1081 | Instrumentation & Control Systems for Industrial Machinery
Course Sector : Instrumentation & Controls
| Duration | Date from | Date to | Course Venue | Course fees | Book a course |
|---|---|---|---|---|---|
| 5 Days | 07/09/2026 | 11/09/2026 | Barcelona | $4,950 | Book now |
| 5 Days | 08/11/2026 | 12/11/2026 | Jeddah | $4,250 | Book now |
| 5 Days | 15/03/2027 | 19/03/2027 | Abu Dhabi | $4,250 | Book now |
| 5 Days | 21/06/2027 | 25/06/2027 | Dubai | $4,250 | Book now |
Course Introduction
In today’s modern industrial plant, continuous machine monitoring is an essential requirement in terms of protecting personnel, protecting the environment, and protecting the plant equipment itself.
Machine monitoring encompasses a wide range of technologies, ranging from supervisory control, interlocking, and sequential control implemented through the programmable logic controller; closed-loop digital control; and modern Smart instrumentation. Machine monitoring not only encompasses the conventional measurement of pressure and temperature but also less well-known measurements, including vibration, thermography, tribology, and analytical xerography.
This workshop, PRACTICAL Instrumentation and Control Systems for Industrial Machinery, is designed to provide engineers and technicians with the basic theoretical and practical understanding of a wide range of modern technologies and how these can be applied to optimize their systems in terms of safety, flexibility, and costs.
Course objective
- Recognize the impact of modern Instrumentation
- Appreciate the major Technologies used in the Measurement of Temperature and Pressure
- Evaluate and select the appropriate Instrumentation System
- Install the process Equipment correctly
- Understand the fundamentals of Process Control
- Fully comprehend the effects of proportional, integral, and derivative control
- Recognize the effect of different Control Algorithms on loop Tuning Performance
- Understand basic serial Communications
- Appreciate the role of the final Control Element in a Control Loop
- Predict cavitation and flashing. Pick the Optimum Valve and Actuator Combination
- Avoid incorrect Valve and Actuator Installation Practices
- Appreciate the differences between Inherent and installed Characteristics
- Pick the Optimum Valve-Actuator Combination
- Understand Potential Failure Analysis and the PFA tree
- Value the principles of Risk Analysis
Course audience
- Control & Instrumentation Engineer
- Controls Technologist
- Instrumentation Technician / Systems Control Tech
- Senior Control & Instrumentation Engineer
- Maintaining Equipment Engineer
- Facilities I&E / Controls Engineer
- Offshore Instrumentation Engineer
Course Outline | 01 Day One
Module (01) Smart Instrumentation
- Temperature
- Basic principles
- Scales
- Expansion systems
- Thermocouples
- Resistance thermometry
- Thermistors
- Radiation thermometry
- Thermal imaging
- Installation considerations
- Pressure
- Basic principles
- Bourdon tubes
- Bellow elements
- Diaphragm elements
- Electrical displacement sensors
- Digital communications & HART protocol
Course Outline | 02 Day Two
Module (02) Digital Control
- ON/OFF control
- Proportional control
- Proportional band vs. proportional gain
- Proportional offset
- Reset
- Integral action
- Integral windup
- Stability
- Bode plot
- NYQUIST plot
- Derivative action
- PID control
- Control algorithms
- Load disturbances and offset
- Speed, stability, and robustness
- Basic principles of tuning
- Open loop reaction curve method (Ziegler-Nichols)
- Default and typical settings
- Closed loop continuous cycling method (Ziegler-Nichols)
- Fine-tuning
- Tuning for different applications
Course Outline | 03 Day Three
Module (03) PLCs and SCADA Systems
- Fundamentals principles
- CPU
- Memory
- Digital I/O modules
- Analog I/O modules
- PLC programming
- Analog control
- SCADA systems
- Field-level Instrumentation and control
- Communication Systems
Course Outline | 04 Day Four
Module (04) Control Valves and Actuators
- Basic theory
- Choked flow
- Flashing and cavitation
- Valve design
- Control valve characterization
- Actuators
- Positioners
- Valve testing
- Calibration
Course Outline | 05 Day Five
Module (05) Predictive Maintenance
- Potential Failure Analysis (PFA tree)
- Fault mechanism analysis (FMEA and FMECA)
- Risk analysis
- Maintenance Strategies
- Predictive maintenance technologies
- Thermography,
- Tribology
- Vibration Analysis
- Analytical xerography
BOOST’s Professional Attendance Certificate “BPAC”
BPAC is always given to the delegates after completing the training course,and depends on their attendance of the program at a rate of no less than 80%,besides their active participation and engagement during the program sessions.
Since 2001, we’ve been at the forefront of professional training in the Middle East — shaping the future of learning and development one success story at a time. With a vision rooted in innovation and excellence, we help individuals, teams, and organizations reach their highest potential through integrated, future-ready training solutions. Our comprehensive programs combine global best practices with local insights, empowering people to grow, lead, and make a lasting impact in their industries.
🔗 Quick Links
Sister Companies to Boost Consulting and Training
most trending
And Recommended Training Courses
We believe in progress for everyone.
We helped more than 10,000 clients over 20 countries on 4 continents in boosting their knowledge, skills, and careers.
Boost Training And Consulting All Copyrights Reserved 2026