course | Mechanical Rotating Equipment: Operation, Maintenance, Inspection
Join our Mechanical Rotating Equipment: Operation, Maintenance, Inspection course in GCC. Gain practical mechanical rotating equipment operation maintenance
MEC-1476 | Mechanical Rotating Equipment: Operation, Maintenance, Inspection
Course Sector : Mechanical Engineering
| Duration | Date from | Date to | Course Venue | Course fees | Book a course |
|---|---|---|---|---|---|
| 5 Days | 09/11/2026 | 13/11/2026 | Abu Dhabi | $4,250 | Book now |
| 5 Days | 05/04/2027 | 09/04/2027 | Abu Dhabi | $4,250 | Book now |
| 5 Days | 05/07/2027 | 09/07/2027 | Barcelona | $4,950 | Book now |
| 5 Days | 06/09/2027 | 10/09/2027 | Dubai | $4,250 | Book now |
Course Introduction
Rotating equipment is one of the major capital cost items, a key reliability problem, and consumes huge amounts of energy. For most companies, the costs of owning and running rotating equipment are much higher than they should be.
A shortage in general knowledge of how to apply, specify, install, and operate the equipment is a major reason for these high costs. This training course is designed to address this problem.
Our Total rotating equipment course is an in-depth look at common equipment’s applications, including selection, operation, troubleshooting, and maintenance. Individuals in industry will find this to be a valuable course for learning the importance of proper equipment operation and typical behavior, and troubleshooting in application.
Course objective
- Understanding Safety & General Underpinning Knowledge
- Rotating equipment components and function.
- Operation and maintenance of the most commonly used equipment.
- General procedures for troubleshooting and solving problems.
- Proper maintenance arrangement for proper installation.
- Familiarization with the ISO standard API related to each equipment.
- Understand the Hydraulics & Pneumatics
- Understand Heat Exchangers' functions
- Understand Plant Maintenance
- Understand Breaking containment
- Know the Pipes, Flanges & Pipe work
- Understand Rigging & Lifting techniques – general awareness for vertical, uncomplicated lifting
Course audience
- Automotive Engineer
- Boiler Engineer
- Ceramics Engineer
- Equipment Engineer
- High-Pressure Engineer
- Marine Engineer
- Mechanical Design Engineer
- Mechanical Engineer
- Naval Architect
- Pipeline Engineer
- Power Engineer
- Rotating Equipment Engineer
- Senior Mechanical Engineer
- Turbine Engineer
- Validation Engineer
Course Outline | 01 DAY ONE
Module (01) Safety & General Underpinning Knowledge
- Authorization and Competency of Mechanical Personnel
- Description of Work
- Role descriptions by competency level
- Facility Maintenance Technician Competency Profile
- Workshop Safety
- Safety in fabrication and installation works
- Safety in metal cutting, forming, and machining
- Workplace Hazards
- Equipment and Execution of Work
Module (02) Hand and Power Tools
- Safe working conditions & techniques
- Safe use of Abrasive wheels on pedestal & angle grinders
- Assembly Tools
- Cutting Tools
- Power Tools
- Motorized or Power-driven
- Electric Drill
- Portable Abrasive Wheel Tools
- Pneumatic Tools
- Hydraulic Power Tools
- The Hazards of Hand Tools
- The Dangers of Power Tools
Course Outline | 02 DAY TWO
Module (03) Measuring Tools
- Rule
- Square Angle
- Angle Meter
- Depth Gauge
- Calipers
- Drill & Standard Wire Gauges
- Feeler Gauge
- Screw Cutting Gauges
- Screw Pitch Gauges
- Micrometer
- Vernier Caliper
- Vernier Depth Gauge
Module (04) Maintenance Introduction
- Maintenance objectives
- Proper safety practice in the workshop
- Types of maintenance
- Run to Failure Maintenance
- Preventive Maintenance
- Predictive Maintenance
- Advanced predictive maintenance techniques
- Vibration Measurement and Analysis
- Infra Thermo-Graphy Technique
- Oil analysis technique
- Maintenance Planning Technique
- Measuring Tools Usage
- Proper Maintenance Practice
Course Outline | 03 DAY THREE
Module (05) Compressors Operation and Maintenance
- Compression Process Fundamentals
- Compressors Types and Usage
- Compressor Selection
- Compressor Surge Phenomena and Control
- Balancing Drum Function
- Dry Gas Seal Fundamentals
Module (06) Shaft Alignment and Bearing Installation and Maintenance
- Shaft Alignment Introduction
- Shaft Alignment Techniques
- Bearing Introduction
- Bearing Types
- Bearing Maintenance
- Bearing Identification
- Bearing Mantling and Dismantling
- Proper Storage Way for Bearings
Course Outline | 04 DAY FOUR
Module (07) Gas Turbine Operation and Maintenance
- Gas Turbine Operation Fundamentals
- Gas turbine main components and their function
- Turbine Auxiliary
- Turbine Hydraulic System
- Turbine Air Filter System
- Turbine Fire Fighting System
Module (08) Valves Selection and Maintenance
- Valves Function
- Valves Type
- Valves Selection
- 8.4 Proper Maintenance Practice for Valves
Module (09) Pumps Operation and Maintenance
- Pumps: Function and Types
- Pumps Classification
- Pumps Selection
- Pumps Mechanical Seal
- Pumps Performance Control.
Module (10) Hydraulics & Pneumatics
- Introduction to Pneumatics
- Applications of pneumatics
- Introduction to Hydraulic
- Hydraulic Equipment
Course Outline | 05 DAY FIVE
Module (11) Heat Exchangers
- Introduction to Heat Transfer
- Shell-and-Tube Heat Exchangers
- Construction & Maintenance of Heat Exchangers
- Maintenance of Heat Exchangers
Module (12) Pipes, Flanges & Pipe work
- Flange identification & Rating – ANSI, GOST “Russian”
- Pipe Material, ASTM standards, Wall thickness & rating
- Pipe specifications & gasket identification
- Weldability of pipe material and preparation for welding
- Bolt torqueing and thread lubricants (lubricants & coefficients of friction)
- Bolt torqueing – Manual wrenches, calibration & hydraulic tools
Module (13) Rigging & Lifting techniques – general awareness for vertical, uncomplicated lifting
- Introduction
- Rigging Fundamentals and Safety
- Rigging Components
- Overhead Cranes
BOOST’s Professional Attendance Certificate “BPAC”
BPAC is always given to the delegates after completing the training course,and depends on their attendance of the program at a rate of no less than 80%,besides their active participation and engagement during the program sessions.
Since 2001, we’ve been at the forefront of professional training in the Middle East — shaping the future of learning and development one success story at a time. With a vision rooted in innovation and excellence, we help individuals, teams, and organizations reach their highest potential through integrated, future-ready training solutions. Our comprehensive programs combine global best practices with local insights, empowering people to grow, lead, and make a lasting impact in their industries.
🔗 Quick Links
Sister Companies to Boost Consulting and Training
most trending
And Recommended Training Courses
We believe in progress for everyone.
We helped more than 10,000 clients over 20 countries on 4 continents in boosting their knowledge, skills, and careers.
Boost Training And Consulting All Copyrights Reserved 2026